Komfovent Domekt R 190 V heat recovery unit filter set F7+M5

Komfovent Domekt R 190 V heat recovery unit filter set F7+M5 – for sensitive and allergic

Retains smallest particles and pollen – best for spring and summer.

Filter set is suitable for:

• Komfovent Domekt R 190 V
• Komfovent Domekt R 200 V
• Komfovent Domekt Rego 200 VE

Filter dimensions:

• 285x130x46 mm

Corresponds to filters of ventilation unit manufacturer :

• 774300060
• 774100091

Need longer lifespan?

Order Komfovent Domekt R 190 V heat recovery unit filter set M5+M5 – for everyday protection

By ordering Komfovent Domekt R 190 V heat recovery unit filter set F7+M5, you will receive:

• 1 piece of Komfovent Domekt R 190 V F7 class filter for supply air,
• 1 piece of Komfovent Domekt R 190 V M5 class filter for exhaust air.

It is recommended to replace F7 class filter once each 4 months,
It is recommended to replace M5 class filter once each 6 months.

Important information about replacing air filters:

• The heat recovery ventilation device filters must be replaced when unit indicates air filter clogging. It is recommended to replace filters at least 2 times a year: before and after the heating season, or more often, depending on the pollution of the environment in which you live and the intensity of use of the ventilation unit.
• Heat recovery ventilation device filter is a disposable product, it is not recommended to reuse it after vacuuming or other type of cleaning.
• It is recommended to switch off the air handling unit before replacing filters, thus protecting it from dust and other unwanted objects.
• It is recommended to clean the filter mounting section as well, when replacing filters.
• Clogged filters unbalance your ventilation system, the unit uses more energy, emits more noise!

For information on how to replace Komfovent Domekt R 190 V heat recovery ventilation device filters, refer to the installation and maintenance manual of the air handling unit.

Air filter design:

• The filter frame is made of impregnated, moisture-resistant cardboard.
• The new type of corrugation, by gluing the folds together, ensures the lowest possible resistance to air flow and a largest possible area of ​​the dust-retaining filtering material.
• The filtering material is glued to the frame on all four sides, thus ensuring that dust does not enter the room through filter leaks.
• The filtering material filler is made of a multi-layer synthetic filtration material that meets the requirements of ISO 16890 and EN 779:2012 standards.