Komfovent Domekt CF 700 F heat recovery unit filter set F7+M5

39.98  available on subscription

Retains smallest particles and pollen – best for spring and summer

Set includes of 1 piece of each F7 and M5 class filter. Dimensions: 400×300×46 mm

Available on backorder

Komfovent Domekt CF 700 F heat recovery unit filter set F7+M5 – for sensitive and allergic

Retains smallest particles and pollen – best for spring and summer.

 

Filter dimensions:

  • 400×300×46 mm

 

Corresponds to filters of ventilation unit manufacturer :

  • 774300099
  • 774100140

 

Need longer lifespan?

Order Komfovent Domekt CF 700 F heat recovery unit filter set M5+M5 – for everyday protection

 

By ordering Domekt CF 700 F heat recovery unit filter set F7+M5, you will receive:

  • 1 piece of Komfovent Domekt CF 700 F F7 class filter for supply air,
  • 1 piece of Komfovent Domekt CF 700 F M5 class filter for exhaust air.

 

Filtration class:EN 779:2012ISO 16890
Supply air filterF7ePM1 70%
Exhaust air filterM5ePM10 55%

 

It is recommended to replace F7 class filter once each 4 months,
It is recommended to replace M5 class filter once each 6 months.

 

Important information about replacing air filters:

  • The heat recovery ventilation device filters must be replaced when unit indicates air filter clogging. It is recommended to replace filters at least 2 times a year: before and after the heating season, or more often, depending on the pollution of the environment in which you live and the intensity of use of the ventilation unit.
  • Heat recovery ventilation device filter is a disposable product, it is not recommended to reuse it after vacuuming or other type of cleaning.
  • It is recommended to switch off the air handling unit before replacing filters, thus protecting it from dust and other unwanted objects.
  • It is recommended to clean the filter mounting section as well, when replacing filters.
  • Clogged filters unbalance your ventilation system, the unit uses more energy, emits more noise!

 

For information on how to replace Komfovent Domekt CF 700 F heat recovery ventilation device filters, refer to the installation and maintenance manual for the air handling unit.

 

Air filter design:

  • The filter frame is made of impregnated, moisture-resistant cardboard.
  • The new type of corrugation, by gluing the folds together, ensures the lowest possible resistance to air flow and a largest possible area of ​​the dust-retaining filtering material.
  • The filtering material is glued to the frame on all four sides, thus ensuring that dust does not enter the room through filter leaks.
  • The filtering material filler is made of a multi-layer synthetic filtration material that meets the requirements of ISO 16890 and EN 779:2012 standards.
Dimensions40 × 30 × 4.6 cm
Shopping Cart